Brocade ICX 6450 Stackable Switches Hardware Installation Guide - Manual (Page 52)

The table below describes the functions of the ICX 6400-EPS1500 LEDs.
System Status LEDs on the ICX 6400-EPS1500 TABLE 11
LED Condition Status
EPS 1 Green The power supply is operating normally. The port is providing power to the connected device
at 12 V and 54 V of power.
Red The port is not delivering power to the device. Power failure at 12 V and 54 V of power.
EPS 2 Green The power supply is operating normally. The port is providing power to the connected device
at 12 V and 54 V of power.
Red The port is not delivering power to the device. Power failure at 12 V and 54 V of power.
EPS 3 Green The power supply is operating normally. The port is providing power to the connected device
at 12 V and 54 V of power.
Red The port is not delivering power to the device. Power failure at 12 V and 54 V of power.
FAN 1 Green The cooling fan is operating normally.
Amber The cooling fan has failed.
FAN 2 Green The cooling fan is operating normally.
Amber The cooling fan has failed.
FAN 3 Green The cooling fan is operating normally.
Amber The cooling fan has failed.
Items included with the ICX 6400-EPS1500
The ICX 6400-EPS1500 ships with all of the following items included in your shipping container. Verify
the contents of your shipping container. If any items are missing, contact the place of purchase.
• ICX 6400-EPS1500 external power supply
• Read Me First document
• Rack mounting kit containing two L-shaped mounting brackets and six sink-head screws
• Two-post rack kit containing four rack-mounting screws and four cage nuts
• EPS AC power cord
• EPS power cord retainer clip
• Four rubber feet
• EPS cord kit that contains:
‐ Three EPS power cords
‐ Three wire saddles
‐ Three cable ties
• China ROHS sheet
Items included with the ICX 6400-EPS1500
50 Brocade ICX 6430 and ICX 6450 Stackable Switches Hardware Installation Guide
53-1003079-01