Brocade Encryption Switch Hardware Reference Manual (Supporting Fabric OS v6.1.1_enc) - Manual (Page 27)

Brocade Encryption Switch Hardware Reference Manual 13
53-1001117-02
2
Configuring the switch
To configure the switch, perform the following tasks. Figure 7 illustrates the flow of these
configuration tasks.
• Connecting a serial cable between switch and host. . . . . . . . . . . . . . . . . . . 15
• Logging in to the serial console port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• Setting the IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Logging off the serial console port and disconnecting the serial cable . . . 16
• Connecting an Ethernet cable and opening a Telnet session . . . . . . . . . . . 16
• Setting the domain ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Verifying correct operation and backing up the configuration . . . . . . . . . . . 19
• Installing SFPs and attaching cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Managing cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21