Introduction, Package contents, 1 introduction – Brocade Mobility RFS7000 Controller Installation Guide User Manual

Page 9

Advertising
background image

Brocade Mobility RFS7000 Controller Installation Guide

1

53-1001574-03

Chapter

1

Introduction

In this chapter

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Site preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

The Brocade Mobility RFS7000 Controller is a high-performance member of
Brocade’s Wireless Controller family. The Mobility RFS7000 Controller provides
centralized Wireless LAN (WLAN) configuration and management by coalescing a
network “intelligence” previously spread across physically distributed access
points. By replacing access points with simpler access ports (or “thin” access
points), the Mobility RFS7000 Controller becomes a WLAN’s single point of contact,
thus reducing wireless networking complexity by moving management out of the
ceiling and into the wiring closet. In addition, through the use of patented Virtual AP
architecture, the Mobility RFS7000 Controller lets you create multiple WLANs
without changing or adding to the existing wired network infrastructure.

This document is written for the network device installer.

Package contents

Inspect the package contents and report any missing or damaged items to your
sales representative. The package should contain the following:

Mobility RFS7000 Controller with Rack Brackets installed

Console Cable

Brocade Mobility RFS7000 Controller Installation Guide (this document)

China RoHS compliance document

Advertising