American Audio SCD-100 - Manual (Page 17)

12. PITCH BEND
This function will momentarily increase or decrease a tracks playback speed using the (-) & (+) PITCH BUT-
TONS (21 & 22). The maximum pitch bend percentage allowed is +/-16%. The pitch bend function will work
in conjunction with the PITCH SLIDER (24) pitch setting. For example, if the PITCH SLIDER (24) is set to a 2%
pitch gain the pitch bending process will begin at 2% and wi
ll continue to the maximum of - /+16%.
PITCH BEND BUTTONS (21 & 22)
The (+) PITCH BEND BUTTON (22) will provide a speed bump and the (-) PITCH BEND BUTTON (21) will pro-
vide a slow down. The extent to which the speed changes is proportionate to the amount of time the button
is pressed. For example, if the (+) PITCH BEND BUTTON (22) is held down continuously, the disc speed will
increases and will continue to increase until it reaches a maximum of 12% speed gain. When you release the
(+) PITCH BEND BUTTON (22) the disc speed will automati
c
ally return to it’s previous speed.
Holding down or tapping on the (+) PITCH
BEND BUTTON (22) will provide a speed
bump in the playback pitch.
Holding down or tapping on the (-) PITCH BEND
BUTTON (21) will provide a slow down in the
playback pitch.
Figure 15
Figure 16
JOG WHEEL (13)
The JOG WHEEL (13) will temporarily bend the pitch if a track
is in play mode. Turing the wheel in a clockwise direction will
increase your track pitch and turning the wheel in a counter-
clockwise direction will slow your track pitch. The speed you
rotate the JOG WHEEL (13) will determine pitch bend per-
centage, to a maximum of +/-16%.
Figure 17
BASIC OPERATION
© American Audio ® - www.americandj.com - SCD-100™ Instruction Manual Page 17
TRACK M S F
COMPACT
DIGITAL AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVER TER COMP ACT DISC PLA YER
ON
OFF
TRACK M S F
COMPACT
DIGITAL AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVER TER COMP ACT DISC PLA YER
ON
OFF
TRACK M S F
COMPACT
DIGITAL AUDIO
1 BIT 8 TIMES OVERSAMPLING D/A CONVER TER COMP ACT DISC PLA YER
ON
OFF