Basic operation, Setting cue points, Creating and playing a loop – American Audio SCD-100 User Manual

Page 18: Exiting a loop, Figure 28, American audio

Advertising
background image

©

American Audio

®

- www.americandj.com - SCD-100™ Instruction Manual Page 18

BASIC OPERATION

13. SETTING CUE POINTS

A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (18) is pressed. A cue point
may be created anywhere on a disc or in a track.

Use the JOG WHEEL (13) to set a cue point by frame. While

JOG WHEEL (13)

JOG WHEEL (13)

the disc is in pause or cue mode, use the JOG WHEEL (13)

to scroll through a track to find your desired starting point.

Once you have found your desired cue point press the PLAY
BUTTON (18)
to enter this point in to the unit's memory. At

BUTTON (18)

BUTTON (18)

this point when ever the CUE BUTTON (16) is pressed it will

return the track to this exact point.

TRACK M S F

COMPACT

DIGITAL

AUDIO

1 BIT 8

TIMES OVERSAMPLING D/A CONVER

TER COMP

ACT DISC PLA

YER

ON

OFF

Figure 28

14.CREATING AND PLAYING A LOOP

A loop is a sound loop that plays continuously. You can use this loop to create effect in your mixing. This loop
has no time limit and you could actually loop the entire length of disc. You create a loop between two continu-
ous points of a disc. The following steps illustrate the procedures for creating a loop:

2) Press the LOOP BUTTON (9). This will set the starting loop
point. The LOOP LED (8) will flash briefly indicating a starting
point has been set.
3) Press the LOOP BUTTON (9) again to set the ending point
for your LOOP (Figure 13). The LOOP LED (8) will begin to
flash indicating a loop has been activated.

1) Press the PLAY/PAUSE BUTTON (18) to activate
playback mode.

TRACK M S F

COMPACT

DIGITAL

AUDIO

1 BIT 8

TIMES OVERSAMPLING D/A CONVER

TER COMP

ACT DISC PLA

YER

ON

OFF

Figure 28

TRACK M S F

COMPACT

DIGITAL

AUDIO

1 BIT 8

TIMES OVERSAMPLING D/A CONVER

TER COMP

ACT DISC PLA

YER

ON

OFF

Figure 28

EXITING A LOOP

-

EXITING A LOOP

EXITING A LOOP

To exit a loop, press the LOOP BUT-

TON (9). Music playback will resume normal play.

TRACK M S F

COMPACT

DIGITAL

AUDIO

1 BIT 8

TIMES OVERSAMPLING D/A CONVER

TER COMP

ACT DISC PLA

YER

ON

OFF

Figure 28

Advertising