Condec DLR334 - Manual (Page 8)

PAGE 8 74845
COMMAND CODE SUMMARY TABLE II
COMMAND RESPONSE D DESCRIPTION
TIR TIR {time/date} Time and Date setup recall.
PAE {p1} ACK Parrallel I/O setup entry.
PAR PAR {p1} Parrallel I/O setup recall.
ANE {anlg 1|---sp adj} ACK Analog setup entry.
ANR ANR { anlg 1|---sp adj } Analog setup recall.
TNE { } ACK Setpoint (Trip point) entry
TNR TNR { } Setpoint (Trip point) recall
TEMPERATURE CAL:
TPD ACK - Temperature Cal on.
TXD ACK - Temperature Cal off.
TRD ACK - Temperature Cal Reset.
TFR TFR {t data} 8 Temperature reading (current)
recall.
RZD ACK - Zero Temp Reference acquire.
RSD ACK - Span Temp Reference acquire.
HxD ACK - Zero Temp Hot acquire (x-1,2 or 3).
HxD ACK - Span Temp Hot acquire (x=X,Y or
Z).
CxD ACK - Zero Temp Cold acquire(x=1,2 or 3).
CxD ACK - Span Temp Cold acquire(x=X,Y or
Z).
DxE {---} ACK Temp. corrections entry (x=1 or 2).
DxR DxR {---} Temp. corrections recall (x=1 or 2).
TxR TxR {---} Temp. diag. data recall (x=1,2 or 3).
9.0 RECALLED DATA:
COMMANDS:
PDR = Display data.
PGR = Pressure data
PNR = Delta Pressure. ;later
PPR = Max data.
PMR = Min data.
RESPONSE DATA:
DATA FORMAT: <pr><unit1><unit2><par><stat>
LENGTH: fixed at 12 characters.
WHERE:
pr: Eight (8) character data field for pressure including polarity and decimal point.
Has "space" for positive data and "minus" (-) for negative data.
Unit1 & 2:Two (2) characters (Refer to Table III and Table IV )
TABLE III TABLE IV
Pressure ‘unit 1’ Assignment Pressure ‘unit 2’
Unit 1 DESCRIPTION Unit 1 DESCRIPTION Unit 2 DESCRIPTION
A mmHgOΕC K Kpa A ABSOLUTE
B BAR L Mbar G GAGE