Davey CLEVALINK SYSTEM CONTROLS - Manual (Page 11)

11
Setting the Timers:
Select Press / Use
Main Menu Menu ( ) Button
Set Timers Arrow Up/Down to locate. Select with Enter ( ) button.
The timer which you want
to use Arrow Up/Down to locate. Select with Enter ( ) button.
“ACT”
Arrow down to locate. Select with Enter ( ) button
Type of outlet. 10A or
15A Arrow Up/Down to locate. Select with Enter ( ) button.
The appliance to be
controlled Arrow Up/Down to locate. Select with Enter ( ) button.
Display will return to timer set up display.
“On Time” Arrow down to locate “On Time”. Select with Enter ( )
button. Enter ( ) again to select Hours or Minutes. Use
UP/DOWN cycle through numbers. Press OK when
complete.
“Day”
To change press Enter( ). Use UP/DOWN arrows to
select “Weekends”, “Every Day” or a day of the week.
Press OK
“Off Time” Arrow down to locate “Off Time”. Select with Enter ( )
button. Enter ( ) again to select Hours or Minutes. Use
UP/DOWN cycle through numbers. Press OK when
complete.
“Day”
As above
Exit to Default display
screen Exit button x 4 / Wait 30 secs for screen to return to
default display
Removing an LCU from the MCU:
Select Press / Use
Main Menu Press Menu ( ) Button
Equipment Menu Press Menu ( ) Button
Remove Outlet Press
Arrow Up/Down to find “Remove outlet”. Select
with Enter button
The outlet type Press Arrow Up/Down button to select outlet type
(2x10A or 15A). Select with Enter button.
The appliance Press Arrow Up/Down button to select the appliance
(or New Unit) to be removed. Select with Enter button.
Exit to Default display screen Press Exit button x 4 / Wait 30 secs for screen to
return to default display