AT&T Speakerphone with Caller ID with Call Waiting 959 - Manual (Page 26)

24
DIRECT
OR
Y OPERA
TION
DIRECT
OR
Y OPERA
TION
Store Numbers and Names in the
Directory
1 Press d, then O. The screen
displays ENTER NUMBER.
2 Dial the telephone number you want to
store (up to 24 digits)
— OR —
Press
R to store the last number dialed.
NOTE: If the redial number is longer than 24 digits,
you will hear an error tone if you are off hook while
storing the number.
3 Press O. The screen display includes
Enter Name.
4 Use the “Keypad Characters” chart on page
23 to enter a name up to 15 characters long.
Use CALL LIST + to backspace and CALL
LIST - to advance or add a space. When you
want to enter two characters in a row which
share a keypad button (for example “M” and
“O”), you must press CALL LIST - to move
the cursor to the next position. There is no time
limit for entering the name.
5 Press O to store the name and number.
NOTE: To exit the directory at any time without
saving changes, press
C.
Store a Pause or Flash in a
Directory Number
Press CALL LIST - twice to store a pause in the dialing
sequence (the screen displays
P). Press F to store
a press of the flash button (the screen displays F).
NOTE: To exit the directory at any time without
saving changes, press
C.
▼
◗◗
▼
▼
◗
▼