AT&T Speakerphone with Caller ID with Call Waiting 959 - Manual (Page 42)

2
Battery Installation
continued from page 1
1. Press down on the battery compartment tabs as shown
and pull to open the battery cover.
2. Insert four new AA batteries (purchased separately) following
the polarity markings in the battery compartment.
3. Close the battery compartment cover, making sure
the cover snaps into place.
Table/Desk Installation
1 Reposition the base wedge for table/desk use.
Press on the base wedge as shown in figure a to remove the wedge.
Turn the wedge so that the larger end is toward the top of the
telephone. Reattach the wedge by positioning it as shown in figure c
and sliding it in the direction of the arrows until it locks in place.
figure a figure b figure c