AT&T Speakerphone with Caller ID with Call Waiting 959 - Manual (Page 7)

5
INST
ALLA
TION
INST
ALLA
TION
Table/Desk Installation
1 Reposition the base wedge for table/desk use.
Press on the base wedge as shown in figure a to remove the
wedge. Turn the wedge so that the larger end is toward the
top of the telephone. Reattach the wedge by positioning it
as shown in figure c and sliding it in the direction of the arrows
until it locks in place.
2 Connect the long telephone line cord to the jack labeled
TEL on the back of the phone.
3 Connect the line cord to a modular wall jack.
continued on page 6
Modular
telephone
wall jack
Telephone
line cord Telephone
line cord
figure a figure b figure c