Elitegroup P71EN installation - Manual (Page 12)

VT6420 User Manual – SATA Controller
Revision 1.01, May 19, 2003 8 BIOS Configuration Utility
Delete Disk Array
A RAID can be deleted after it has been created. To delete a RAID, use the following steps:
1. Select Delete Array in the main menu and press <Enter>. The channel column will be activated.
2. Select the member of an array that is to be deleted and press <Enter>. A warning message will show up, press Y to delete or
press N to cancel.
Deleting a disk array will destroy all the data on the disk array except RAID 1 arrays. When a RAID is deleted, the data on these
two hard disk drives will be reserved and become two normal disk drives.