Create and delete spare hard drive, Vt6420 user manual – sata controller – Elitegroup P71EN installation User Manual
Page 13
VT6420 User Manual – SATA Controller
Revision 1.01, May 19, 2003
9
BIOS Configuration Utility
Create and Delete Spare Hard Drive
If a RAID 1 array is created and there are drives that do not belong to other arrays, the one that has a capacity which is equal to or
greater than the array capacity can be selected as a spare drive for the RAID 1 array. Select Create/Delete Spare and press
<Enter>, the channel column will then be activated. Select the drive that you want to use as a spare drive and press <Enter>, the
selected drive will be marked as Spare. The spare drive cannot be accessed in an OS.
To delete a spare drive, highlight Create/Delete Spare and press <Enter>. The spare drive will be highlighted, press <Enter> to
delete the spare drive.