Model description, Pre-installation – Armstrong World Industries 6100 User Manual

Page 4

Advertising
background image

4

• The disconnecting switch should have a breaking capacity sufficient to interrupt the largest

normal running current of loads. The breaking capacity required should be selected according

to the table, 7-1, 7-2, 7-3 and 7-4 located on page 7.

Model Description

A = Rated voltage of unit is 208V

D = Rated voltage of unit is 480V

B = Rated voltage of unit is 240V/220V

E = Rated voltage of unit is 600V

C = Rated voltage of unit is 400V/380V

Pre-Installation

1.

Check Shipment. A claim should be filed with the transportation company, (and reported to

Armstrong), if any items are missing or damaged.

2.

Check Local Codes. The installation of HumidiClean should be in accordance with all applicable

building, plumbing, and electrical codes.

3.

Site Selection. The humidifier should be installed in an easily accessible location. Do not install

the unit where malfunction of the humidifier might cause damage to non-repairable,

irreplaceable or priceless property. Refer to Installation section for other details regarding site

selection.

HC - XXXX (DI) - XXX X

Series HumidiClean™ Humidifiers

Type number

6100

6300

6500

6700

Quality of Water

Blank: Tap water

DI: Deionized or reverse osmosis

Rated Power

In KW. The minimum is 3 KW, and the maximum is 96KW.

Symbol of Rated Voltage

Advertising
This manual is related to the following products: