Elitegroup G900 User Manual - Manual (Page 74)

Defining the Video Source
Select the PAL, NTSC or SECAM, depending
on which standard the selected source is using.
The factory default is the standard used by your
purchase country, and normally there is no need
to change this setting.
If you are working outside your country, you
are required to adjust the setting of our video
source. From the WinDVR window, click on
your mouse right button and select the “Setup”
item.
From the “Setup” dialog window, click on the
“Standard” selection items and drag down the
arrow to select on the type of TV standard
based on your respective country of origin.
66