Elitegroup G900 User Manual - Manual (Page 91)

How to install your New Hard Drive
1.
2.
3.
4.
You will need to align the tabs on the drive bracket with the slots on
the bay.
Press down gently on the drive bracket until it engages with the
system. Do not force the drive into place this can bend the pins on
the hard drive.
Slide the compartment cover into place and be sure the screw holes
on the cover align completely with the screw holes in the case.
Secure the cover with the two screws.
If your system supports RAID
As mention on previous Chapter on RAID setting, the RAID provide the
use of one or more drives in combination for to respond for unexpected
hardware or software failure and performance.
Repeat the steps mentioned on the topics of “How to Remove your Hard
Drive” and “How to Install your New Hard Drive”. Remove the hard
drive one after the other to complete the procedures.
83