Specifications, Installation options, Features – Avalon Stoves Cedar EF User Manual

Page 7: Heating specifications, Dimensions: fuel, Electrical specifications

Advertising
background image

Specifications

5

Travis Industries

4 1 2 2 1 0 4

9 3 5 0 8 1 1 7

Installation Options:

Freestanding Stove

Residential or Mobile Home

Horizontal or Vertical Vent

Features:

Ember Fyre ™ Burner for "Wood Fire" Look

Works During Power Outages

Optional Thermostat or Remote Control

Variable-Rate Heat Output

Optional Blower

Heating Specifications:

Approximate Heating Capacity (in square feet)*......500 to 1,500 With Blower, 500 to 1200 Without

Maximum BTU Input Per Hour ...............................31,000 (NG & LP)

Minimum BTU Output on Low (with blowers on) .....16,000 (NG) 20,100 (LP)

Steady State Efficiency ............................................................................up to 86.1 %

AFUE......................................................................................................up to 67.2%

*

Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside
temperature.

* *

Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent
of installed system. To measure the net BTU’s, multiply the BTU input by the efficiency percentage.

Dimensions:

Fuel:

Weight: 175 Lbs

Measure

Clearances from

the Stove Top

The starter section is

3/8" above the top.

17-5/8"

28"

22-1/2"

6"

This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using the
included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.

Electrical Specifications

Electrical Rating (with optional blower) .........................115 Volts, 0.8 Amps, 60 Hz (92 watts on high)

Advertising