Elitegroup C7VCM2 (V1.0) - Manual (Page 15)

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
To avoid the system unstability after clearing CMOS, we recommend users to
enter the main BIOS setting page to “Load Optimal Defaults” and then
“Save Changes and Exit”.
Jumper Type Description Setting (default)
CLR_CMOS1 3-pin CLEAR CMOS
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the CMOS,
make sure to turn the sys-
tem off.