Elitegroup C7VCM2 (V1.0) - Manual (Page 27)

21
Installing the Motherboard
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
This concludes Chapter 2. The next chapter covers the BIOS.
PS2 Mouse
PS2 Keyboard
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
Use the COM ports to connect serial devices such as mice or fax/
modems.
Connect your monitor to the VGA port.
Connect an RJ-45 jack to the LAN port to connect your com-
puter to the Network.
Use the USB ports to connect USB devices.
Use the two audio ports to connect audio devices. The first jack
is for stereo line-out signal. The second jack is for microphone.
Serial Ports
(COM1)
VGA Port
LAN Port
(optional)
USB Ports
Audio Ports
Parallel Port
(LPT1)
Use the LPT1 to connect printer or other parallel communications
devices.