Elitegroup C7VCM2 (V1.0) - Manual (Page 46)

40
Using BIOS
IRQs Activity Monitoring (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Item Help
Menu Level
Primary INTR [ON]
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
[Disabled]
Set any IRQ ro Enabled to allow activity at the IRQ to wake up the system from a
power saving mode.
Press <Esc> to return to the Power Management Setup screen.
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
The screen enables you to set IRQs that will resume the system from a power saving
mode.