Elitegroup ST945GM (V1.0) - Manual (Page 16)

10
Installing the Motherboard
Connecting Case Components
After you have installed the motherboard into a case, you can begin con-
necting the motherboard components. Refer to the following:
1 Connect the CPU cooling fan cable to CPUFAN1
2 Connect the system cooling fan connector to CASFAN1
3 Connect the case switches and indicator LEDs to the PANEL1.
4 Connect the standard power supply connector to ATX_POWER1.
CASFAN1: FAN Power Connector
Pin Signal Name Function
1 GND System Ground
3 NC Not connected
2 +12V
CPUFAN1: FAN Power Connector
1 GND System Ground
2 +12V Power +12V
3 Sense Sensor
Pin Signal Name Function
Users please note that the fan connector supports the CPU cooling fan of
1.1A ~ 2.2A (26.4W max) at +12V.
Power +12V