Elitegroup ST945GM (V1.0) - Manual (Page 44)

38
Using BIOS
Supervisor Password
This item indicates whether a supervisor password has been set. If the password has been
installed, Insatall displays. If not, Not Install displays.
Change Supervisor Password
You can select this option and press <Enter> to acess the sub menu. You can use the sub
menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
User Passward
This option enables yu to install or change a passward.
User Password
This item indicates whether a supervisor password has been set. If the password has been
installed, Insatall displays. If not, Not Install displays.
Press <Esc> to return to the main menu setting page.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box
appears, press <Y> to discard changes and exit, or press <N> to return to the main
menu.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
press <Y> to save and exit, or press <N> to return to the main menu.
If you have made settings that you do not want to save, use the “Exit
Without Saving” item and press <Y> to discard any changes you have
made.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Help Item User Password: Not Installed
F2: Switch to next color F9: Load Default Settings
mnlk : Move ESC: Exit F1: General Help F10: Save Enter : Select +/-/: Value
Install or Change the
password.
User Password