Elitegroup ST945GM (V1.0) - Manual (Page 9)

3
Introducing the Motherboard
Onboard LAN (Optional)
The onboard LAN controller provides the following features:
• Supports IEEE 802.3 u/ab, 802.1p and 802.1q
• Compliant with 10/100/1000 IEEE 802.3
•
Supports WOL power management and ACPI 2.0 specification
• Two-Wire Serial Interface (TWSI) for VPD
• Comppliant with PCI Express base specification 1.1
•
Compliant to 802.3x flow control
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
• One DVI port
• Two COM ports
• Four USB ports
• One 1394 port (optional)
• One LAN port (optional)
• Audio jacks for microphone, line-in and line-out
The motherboard comes with the following expansion options:
Expansion Options
• One PCI Express x1 slot
• One Mini PCI slot
• One 32-bit PCI v2.3 compliant slot with riser card support
The motherboard supports UDMA bus mastering with transfer rates of 100/66 MB/s.
• One 40-pin IDE low profile header that support two IDE devices
• Two 7-pin SATA connectors
• One SCN slot for CF (Compact-Flash) card installing
Audio
• Supports 2W/channel
• Compliant with - 65 dB ripple rejection and channel separation, output
referred
• meets very low cross-over distortion
• Wide supply range: 6V-24V
• Compliant with the AC’97 v2.3 CODEC
• Supports 6-channel audio CODEC designed for PC multimidia systems
• Provides three analog line-level strereo inputs with 5-bit volume control:
Line-in, CD, AUX
•
Meets Micrsoft WHQL/WLP 2.0 audio requirements
This motherboard may support either of the following Audio chipset: