Hired-Hand Mega-Cool: Mega-Cool Pad Extender Kit - Manual (Page 4)

Hired-Hand Mfg., Inc. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000
Sheet Part No. 4801-5136 Rev. 12-04 Page 4 of 5
40”
Side View
STEP 7
Mount the bottom of the Top Extender Bracket (0404-4657) based on the
dimensions from Table “C”. Mount on 40“ (1.02 m) centers. NOTE: If the opening is based on
the dimensions in Table “A”, then the bottom of the Top Extender Bracket will be flush with the
top of the opening. NOTE: 2 x 4 boards for curtain not shown for clarity.
Table “C”
System Size
4 foot 51 ½" (1.31m)
5 foot 63 ½" (1.61m)
6 foot 75 ½" (1.91m)
Table
“C”
Mount the Mega-Cool Back Plates. Back Plates are in 10 ft (3.05 m) sections.
The Mega-Cool Back Plate rests on top front edge of Top Extender Bracket.
STEP 8
Side View
0404-4546
MOUNTING SCREWS
Material Part Number Description
METAL 1004-0050 SCREW SM #14 X 1” hx tek z
NOTE: Back Plates must join at an
Extender Bracket location.
Openi
ng in Wall
Measure dimension
“C” from top of
flange on bracket.
0404-4657