Hired-Hand Mega-Cool: Mega-Cool Pad Extender Kit - Manual (Page 5)

Hired-Hand Mfg., Inc. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000
Sheet Part No. 4801-5136 Rev. 12-04 Page 5 of 5
MOUNTING SCREWS
Material Part Number Description
WOOD 1004-1386 SCREW SM 10-12 X 1” hz x
METAL 1004-0050 SCREW SM #14 X 1” hx tek z
Mount the Mega-Cool Top Flashing as shown to split joints of
Back Plate. Note: The Back Plate rests on top of Top Extender Bracket.
STEP 9
STEP 11
Installation of the Pad Extender Kit is complete. Refer to the
Hired-Hand Manual (Part No. 4801-5120) for instructions on installing the
remainder of the Mega-Cool System.
Mount the Spray Bar Support Brackets.
NOTE: Holes in Back Plate are pre-punched.
STEP 10
Side View
0404-4656
MOUNTING SCREWS
Part Number Description
1004-1130 SCREW SM 8-15 X ½” hx SL A Z
Side View
0403-4547