Hired-Hand Farm Hand Series: Data Shuttle Launch Pad - Manual (Page 21)

Part No. 4801-0165 Rev 7-02 Data Shuttle Launch Pad 19
Select MENU: or TOOL BAR:
Save As window - The default file name is the description of the log chosen when the
Shuttle was launched. Choose
either the default name or type in a
new file name for storing the data
from the Shuttle. A plot of the
data will be displayed as soon as
the data is saved.
(3) Read Stored Programs from Data Shuttle -The screen shown at the right will
indicate the quantity of programs. Clicking OK will
indicate the type of controller that the program is
intended for. After clicking “OK”, Launch Pad will
read each program from the Data Shuttle and request a
program name.
Enter a program name - Clicking
OK on the “Enter a Program name ”
screen will save the program into the
Controller’s program folders. This
program can then be used to program
a controller at a later time through the
controllers programming screens.
15. Viewing Temperature Data from the Data Shuttle
Starting
Select the tool bar or from the File menu, click on
Open and open a data file. The directory used for the
Open command is the default directory.
The Open window will display
the current files that can be
viewed by the Launch Pad.
Your listing will, of course, be
different from the one shown
here. Double click on the file
name or select the file name
and click on Open. The
following plot is of the file
Overnight ramping!!!