Aiwa AV-DV500 - Manual (Page 11)

When pressing the TUNER button, previously tuned station is received (Direct Play Function).
The POWER button is also available.
Operation is possible after four seconds.
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button to
ON.
To use speaker system B: Set the FRONT SPEAKERS B button to ON.
To use both speaker systems: Set both the buttons to ON.
Set the button(s) to OFF to turn off the speaker system(s).
NOTE
As the front speaker systems A and B are connected in series:
- The sound will be slightly decreased when using both speaker systems.
- No sound can be heard if the FRONT SPEAKERS A and B buttons are set to
ON when only one speaker
system is connected.
To change a displayed name for the AUX/TV button and VIDEO 2/5 CH button
When the AUX/TV button is pressed, AUX is displayed initially. It can be changed to TV. With the power on,
press the POWER button while pressing the AUX/TV button.
The displayed name for VIDEO 2/5 CH button can be changed to VIDEO 2, LD or MD; with the power on, press
the POWER button while pressing the VIDEO 2/5 CH button.
This function button also works as the 5 CH surround on/off switch. With this function being selected, press the
VIDEO 2/5 CH button. "5 CH" is displayed and 5 CH surround is turned on.
Using the headphones
Connect the headphones to the PHONES jack with a standard stereo plug (o6.3mm, 1/4 inch). Be sure to set the
FRONT SPEAKERS A and B buttons to
OFF. Otherwise sound is output from the speakers.
NOTE
When using the headphones, set the 5 CH surround, DOLBY PRO LOGIC and DSP system to off.
To turn the unit off, press the POWER button.
SETTING THE CLOCK
When the AC cord is connected for the first time, the clock on the display flashes.