Aiwa AV-DV500 - Manual (Page 16)

SELECTION OF AUDIO/VIDEO SOURCE
1 Select the program source.
Press one of the FUNCTION buttons or the TAPE MONITOR button.
To listen to or watch The button pressed
Tape TAPE MONITOR
Radio TUNER
Record PHONO
Television, etc. AUX/TVa
Compact Disc CD
Video (VCR or LD) VIDEO 1, VIDEO 2/5 CHa, VIDEO 3
MD VIDEO 2/5 CHa
DVD VIDEO 2/5 CH
a) For selecting AUX/TV, or VIDEO 2/LD/MD, see "To change a displayed name for the AUX/TV button and
VIDEO 2/5 CH button" of "BEFORE OPERATION" (see page 6).
NOTE
When using a turntable with a built-in equalizer amplifier, set the switch of the equalizer amplifier to off. See the
instructions of the turntable for further information.
2 Start the selected program source.
3 Adjust the sound.
About the video source to the monitor or TV
V1: VIDEO 1, V2: VIDEO 2, V3: VIDEO 3
The selected video source is indicated on the display and the video signal through the MONITOR VIDEO OUT jack
is output on the TV.