LT Security LTD2316ME - Manual (Page 26)

DVR User Manual
20
4.1.3 DST
Step1: enter into system configurationbasic configurationDST; refer
to Fig 4-5:
Step2: in this interface, enable daylight saving time, time offset, mode,
start & end month/week/date, etc.
Step3: click
“default” button to resort default setting; click “apply” button to
save the setting; click “exit” button to exit current interface.
Fig 4-5 basic configuration-DST
4.2 Live configuration
Live configuration includes four submenus: live, main monitor, spot and mask.
4.2.1 Live
In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast.
Step1: enter into system configurationlive configurationlive; refer to Fig 4-6:
Note: Click Camera Name, a soft keyboard will pop up. User can self-define the camera name. Click Shift button, user can
input Capital letters; click Shift button again, user can input Chinese characters.
Step2: tick off camera name; click
“setting” button, a window will pop-up as Fig 4-7:
Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default
setting, click “OK” button to save the setting.
Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup.