7 user management configuration – LT Security LTD2316ME User Manual

Page 48

Advertising
background image

DVR User Manual

42

4.7 User management configuration

Step 1: enter into system configurationuser management configuration; refer to Fig 4-34:
Step 2: click Add button to display a dialog box as Fig 4-35:

Fig 4-34 user management configuration Fig 4-35 add-general

① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK
button. Then this user will be added into the user list box; click Exit button to exit the current interface.
Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify computer; the, the
user can log in DVR on the binding computer after set the specific binding MAC address.

② Authority:
Step 1: enter into Add userauthority; refer to Fig 4-36:

Step 2: In the authority interface, assign the definite operation right for that user.
Step 3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address.
Step 4: select the user that user wants to delete in the user list box and then click Delete button to delete this user.
Step 5: click Change password button to modify the password; click Exit button to exit the current interface.

Advertising
This manual is related to the following products: