LumaSense Technologies INNOVA 1316A-2 - Manual (Page 62)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 62 of 97
Figure 4.7. The Status Window displaying Zero failed.
5. If the reference channel gain cannot be set, the following
warnings occur( see figure 4.7).
CO
2
Zero Fail.
Freon Zero Fail
6. If the peak-to-peak value for any IR channel is less than a
flash-memory-resident minimum value, the following warnings
occur see figure 4.8 :
IR Signal Lost
CO
2
Data Invalid
Freon Data Invalid