LumaSense Technologies INNOVA 1316A-2 - Manual (Page 80)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 80 of 97
Figure 4.31. The Status window showing that Freon is Span
Calibrated (Valid).
Before starting a Freon calibration verify that the Freon selected in
the Freon Mode (FREON1/FREON2) is as for the supplied gas from
the gas cylinder.
Consult the Main Menu see figure 4.32 or in the Bench Command
menu (see figure 4.21 ) select Data/Status and select the Freon to be
used for the calibration.