AT&T 3070 - Manual (Page 23)

AUTO INTERCOM
Use the Auto Intercom feature for one-touch dialing of intercom
numbers.
If you program this feature on a button with lights, the green light
next to the button goes on when the person at that intercom uses
his or her voice terminal or uses the Do Not Disturb feature. You
can use an Auto Intercom button whenever you would usually
dial an intercom number.
To program: ●
T/P to P
●
Touch the button ● Dial * 91
+ a MERLIN system intercom number
● T/P to center
Ringing Intercom Calls
To place a ringing intercom call with one touch:
●
●
●
Touch the Auto Intercom button for the intercom number
you want to dial.
Your voice terminal speaker goes on, and you hear ringing.
NOTE: If the red light next to Intercom-Voice is on, touch
Intercom-Ring before you touch the Auto Intercom button.
When you hear the other person answer, lift your handset.
John +
If the line is busy or if no one answers:
Speaker
Touch Speaker to cancel the call.
22