AT&T 3070 - Manual (Page 41)

CALL PARK
Use the Call Park feature to put a call on hold for someone to
pick up from any voice terminal in your
MERLIN system. You
can use the instructions below to program a Call Park button
on your voice terminal. Or, you can save a feature button for
another use, and dial a code to park a call.
If you have a loudspeaker paging system, you can use it to an-
nounce the call.
If no one answers a parked call, your voice terminal rings to re-
mind you the call is still parked.
To program: T/P to P ● Touch a button ● Dial * 86
T/P to center
●
●
To park a call using a Call Park button:
Touch Call Park.
Hang up.
●
●
●
●
●
Call Park +
Using a Dial Code
To park a call using a dial code:
Touch Transfer.
The green light next to the line’s button flashes.
Dial your own intercom number.
Hang up.
Transfer
+ +
your
intercom
number
40