Seca 955 - Manual (Page 14)

14 •
5.2 Establishing the power supply
Power is supplied to the scale with a rechargeable bat-
tery block or a power pack (both included in the scope
of delivery).
Insert the rechargeable
battery block
1. Press on latch of battery compartment.
2. Move down lid of battery compartment.
3. Remove the connector cable from the battery com-
partment.
4. Connect the connector cable to the rechargeable
battery block.
5. Insert the rechargeable battery block into the bat-
tery compartment.
6. Close the battery compartment.