2 operating the scale in a wireless group (menu), Activating the wireless module (sys), Setting up a wireless group (lrn) – Seca 635 User Manual
Page 88: 2 operating the scale in a, Wireless group (menu)
88 •
7.2
Operating the scale in a
wireless group (menu)
All the functions you need to operate the device in a
seca wireless group can be found in the "rF" submenu.
Information for navigating in the menu can be found on
page 81.
Activating the wireless
module (SYS)
The device is supplied with the wireless module deacti-
vated. You have to activate it before you can set up a
wireless group.
NOTE
If you activate the wireless module, the power
consumption of the device increases. We rec-
ommend using a power pack for operating the
device in a wireless network.
1. Switch on the device.
2. Select the "SYS" menu item from the "rF"
submenu.
3. Confirm your selection.
4. Select the "On" setting.
5. Confirm your selection.
You exit the menu automatically.
Setting up a wireless
group (Lrn)
To set up a wireless group, follow the instructions
below.
1. Switch on the device.
2. Call up the menu.
Reg. Devices (M)
•
Channel 1 (C1)
•
Channel 2 (C2)
•
Channel 3 (C3)
Stop
rF
Group (ID)
Autosend
•
on
•
off
Autoprint
•
HI
•
MA
•
HI_MA
•
off
Time
•
Year
•
Month
•
Day
•
Hour
•
Minute
……
System
•
on
•
off
……
learn