Seca 856 - Manual (Page 16)

16
Weighing with pre-Tare
If the pre-Tare function is activated, a stored weight value is deducted from the currently
measured weight. This function can be useful if the weight of a dish is not to be included
in the display, for example.
– Press the Start key with no load on the
scale.
se(A , 8.8.8.8.8. and 0 appear con-
secutively in the display. The scale is
then automatically set to zero and ready
for operation.
– While the additional weight is on the
scale, store the weight (e.g. of a dish) by
keeping the Pretare key depressed for
some time).
The tare value remains stored even after
the scale is switched off.
– Now put the item for weighing on the
scale.
The scale determines the weight.
– Briefly pressing the Pretare key sub-
tracts the additional weight from the
measuring result.
You can now perform as many weigh-
ing operations as you like.
– To return to normal weighing mode,
press the Pretare key.
– To switch off the scale, press the Start
key again.
5. Cleaning
Clean the housing as required using a domestic cleaning agent or commercially-available
disinfectant. Follow the manufacturer’s instructions.
Under no circumstances use abrasive or acid cleaners, white spirit, benzene or the like for
cleaning. Such substances can damage the high-quality surfaces.