Seed Hawk Ground Drive: Granular & Liquid 2011 - Manual (Page 27)

Seed Hawk
®
Manual Granular and Liquid Tanks Page 22
4.2.2 Operating the Conveyor
1. Ensure that all screens and shrouds are
in place and that cleanout gate on each
meter is closed, Figure 18.
2. Activate tractor hydraulic circuit #4.
3. Use either of the buttons located at the
top and bottom of the conveyor to start
and stop the conveyor, Figure 19.
4.2.3 Conveyor Position for Unloading Air Tank
1. Using your remote, allow the conveyor
hopper to pivot under any of the tank
compartments in order to empty them,
Figure 20
Figure 18
Figure 19
Figure 20