AMX i!-EquipmentMonitor - Manual (Page 13)

Running i!-EquipmentMonitor
9 i!-EquipmentMonitor
i!-EquipmentMonitorOut.axi Functions (Cont.)
SmtpSetTimeOff-
set(CHAR Offset[])
Call this to configure
the local timezone
SmtpSetTimeOffset has these arguments:
Offset String containing the local timezone offset. This string is formatted as "+/-
HHMM" where "+/=" is "+" or "-" depending on your timezone relative to GMT, "HH" is
the offset in hours relative to GMT and "MM" is the offset in minutes relative to GMT.
Some Common Offsets are:
-0500 : Eastern time (UTC - 5:00)
-0600 : Central time (UTC - 6:00)
-0700 : Mountain time (UTC - 7:00)
-0800 : Pacific time (UTC - 8:00)
-0900 : Alaska (UTC - 9:00)
-1000 : Hawaii (UTC - 10:00)
+0000 : Greenwich Mean Time (same as UTC)
+0000 : Dublin, Edinburgh, Lisbon, London (UTC + 0:00)
+0100 : Brussels, Copenhagen, Madrid, Paris, Vilnius (UTC + 1:00)
+0100 : Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (UTC + 1:00)
+0200 : Eastern Europe (UTC + 2:00)
+0900 : Osaka, Sapporo, Tokyo (UTC + 9:00)
+0800 : Hong Kong SAR (UTC + 8:00)
+0700 : Bangkok, Hanoi, Jakarta (UTC + 7:00)
+0300 : Baghdad, Kuwait, Riyadh (UTC + 3:00)
+0200 : Israel (UTC + 2:00)
-0600 : Mexico City, Tegucigalpa (UTC - 6:00)
-0600 : Central America (UTC - 06:00)
+0200 : Jerusalem (UTC + 2:00)
+0300 : Nairobi (UTC + 3:00)
Example:
SmtpSetTimeOffset ('-0600')
Remarks:
SmtpSetTimeOffset should be called to configure i!-EquipmentMonitor to send emails
with the correct time. Some SPAM detectors may mark an e-mail as spam if the
timezone is not correctly reported.
i!-EquipmentMonitor is designed to work with i!-TimeManager to obtain timezone
information. If you have included i!-TimeManager in your program and the virtual
device for i!-TimeManager is defined as "vdvTmEvents", the timezone will be config-
ured correctly.
SmtpSetServer
Sets your SMTP
Server Name for your
use.
Syntax:
SmtpSetServer(CHAR Server[])
SmtpSetServer has these arguments:
Server: String containing the name or IP of your e-mail (SMTP) server.
SmtpSetServer does not return a value.
Example:
SmtpSetServer('mail.amx.com')
Remarks:
SmtpsetServer should be called in DEFINE_START of your application.