AMX i!-EquipmentMonitor - Manual (Page 5)

Introduction
1 i!-EquipmentMonitor
Introduction
i!-EquipmentMonitor
™
is an application that allows you to send and receive e-mail directly from a
NetLinx
™
Control System. i!-EquipmentMonitor is primarily used to send and receive NetLinx
Control System e-mails, such as sending e-mail notifications for system problems or equipment
trouble and receiving
e-mails for Control System messaging. i!-EquipmentMonitor consists of the following files:
i!-EquipmentMonitorIn.axi is an include file for receiving e-mails using POP3
protocol.
i!-EquipmentMonitorOut.axi is an include file for sending e-mails using SMTP
protocol.
i!-EquipmentMonitorTest.axs is a test program using both i!-EquipmentMonitorIn.axi
and i!-EquipmentMonitorOut.axi.
Supported Operating Systems
Windows 95
®
/98
®
(with at least 48 MB of installed memory)
Windows NT 4.0
®
Workstation or Server (service pack 6 B or greater, with at least
64 MB of installed memory)
Windows 2000
®
Professional or Server (running on a Pentium 233 MHz processor
(minimum requirement); 300 MHz or faster recommended, with 96 MB of installed
memory.)
Minimum PC Requirements
Windows-compatible mouse (or other pointing device)
At least 5 MB of free disk space (150 MB recommended)
VGA monitor, with a minimum screen resolution of 800 x 600
A Network adapter
A Web server such as Personal Web Server (PWS) or Internet Information Server (IIS)
Windows 95
®
and 98
®
use PWS.
Windows 2000
®
Professional or Server, and Windows NT 4.0
®
Server use IIS.