Triton 9100 User Manual - Manual (Page 137)

S
UPPLEMENT
B
SB-13
TDM D
EFAULT
S
ETTINGS
The TDM dispenser comes with default settings as follows:
1. Each cassette type is designated as cash
2. Value (denomination) defaults to zero
During the boot procedure, terminals configured with a multi-feed channel terminal TDM will force an
Error Code 156 to ensure the user enters the cassette setup management functions to configure and
put at least one cassette in service.
TDM C
ONFIGURATION
New management screens and options accompany the introduction of the multi-cassette TDM. This
section describes the management flow implemented to support configuring and managing both
single1 and multi-cassette TDM mechanical dispensers. The following screens are defined to lead the
user though the configuration process:
* NOTE - Again, only cassette A is relevant to the 8100 terminals with the TDM-50 fixed bin
dispenser and 9100 terminals configured with a TDM-100. All other cassette buttons (B-D) should
be grayed out.
T
ERMINAL
P
ARAMETERS
This menu provides the options for entering cassette setup.