U.S. Sunlight 2014ST Rigid Tube Kit - Manual (Page 4)

Apply Foil Tape to seal and secure
Step 14
Cut strips of the foil tape about 45” in length and apply to all transition areas starting from the Upper Elbow. (fig. 33 & 34)
When you get to the transition at the Diffuser Housing and Lower Elbow, cut a large piece of tape about 52” in length to
adequately cover the uneven surface as shown in
(fig. 35 & 36). Try to form the tape around the surfaces without tearing
so that it will create a tight seal.
fig. 33
fig. 34
fig. 35
fig. 36 fig. 37
After you have taped
the transition areas,
your Rigid Tube Kit is
installed.
(fig. 35)
Just replace the
Diffuser Assembly and
Trim Ring to complete
the process.
Manufacturer’s Limited Warranty
U. S. Sunlight Corp. (“Manufacturer”) warrants that certain of its product components are free from defects of workmanship and/or materials
for a period of time commencing on the date of original purchase and continuing as noted hereafter: (a) roof flashing for a period of ten (10)
years (b) flexible tubing for a period of ten (10) years (c) ceiling lens diffuser house for a period of ten (10) years.
Disclaimer
Except as expressly set forth herein, all Manufacturer’s products, including components thereof, are sold “AS IS” without warranty of
merchantability, fitness for intended purpose, or other warranty, express or implied. In no event shall Manufacturer be liable for the loss of
profits, indirect, special, incidental, consequential or other similar damages, including but not limited to any claim or demand arising out of the
installation, furnishing, or functioning of a product or use by purchaser or any third party. The warranty terms and conditions detailed above
do not extend to misuse, neglect, abuse, alteration, exposure to extreme weather conditions, lightning strikes, physical damage to any
product, or damages caused by transportation or installation of any product. Manufacturer explicitly does not warrant any labor, shipping, or
service fees incurred by purchaser for the replacement, repair, or exchange of any product or product components claimed under the above
warranty terms and conditions.
Warranty Claims
Warranty claims shall be submitted in writing to Manufacturer at its principal place of business. Claims shall include a copy of the original
purchase invoice, purchaser’s name, address, telephone number, and e-mail address, and such other particulars as are necessary to
describe the claimed defect. If requested by Manufacturer, purchaser shall ship the claimed defective component(s) to Manufacturer’s
principal place of business, FOB destination, freight prepaid, for evaluation. As to any product component determined by Manufacturer to
contain a defect covered by its warranty, Manufacturer reserves the right, at its discretion, to repair or replace the defective component, or
rebate a portion of the purchase price prorated based on the balance of the warranty term.
General
This limited warranty contains all of the terms and conditions of Manufacturer’s warranty of the purchased product and its components. No
representation, arrangement, or agreement not appearing herein shall be binding on Manufacturer. This limited warranty is issued in and shall
be governed by the laws of the State of California.
W A R R A N T Y
R E G I S T R A T I O N
CUT HERE
WE WOULD LOVE TO HEAR FROM YOU!
To register please visit our website: www.ussunlight.com
or simply fill out this form and mail to:
Name ________________________________________________________Phone________________________________________
Address ___________________________________________________________________________________________________
City __________________________________________________________ State ______________ Zip _____________________
Email _____________________________________________________ Would you like to be included in our newsletter? Y or N
Product Name __________________________________________ Date of Purchase ___________________________________
Purchased From ______________________ Name of Installer _____________________________________________ (self )
Phone # of Installer ___________________ How satisfied are you with the install? Not Satisfied Somewhat Very
Comments ____________________________________________________________________ ________________________
923 Tahoe Blvd. Suite 110 | Incline Village, Nevada 89451