Acnodes PC6152 - Manual (Page 66)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
PC6152
15” Core 2 Duo touch anel PC
4-11 Load Optimized Defaults
When you press <Enter> on this category, you get a confirmation dialog box with a message similar to
the following:
Pressing "Y" loads the default values that are factory setting for optimal performance system opera-
tions.
4-12 Password Setting
User is allowed to set either supervisor or user password, or both of them. The difference is that the
supervisor password can enter and change the options of the setup menus while the user password
can enter only but do not have the authority to change the options of the setup menus.
TO SET A PASSWORD
When you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password up to eight characters in length, and press < Enter >.
The password typed now will clear any previously entered password from CMOS memory. You will be
asked to confirm the password. Type the password again and press the < Enter > key. You may also
press < Esc > to abort the selection and not enter a password.
User should bear in mind that when a password is set, you will be asked to enter the password every-
thing you enter CMOS setup Menu.
TO DISABLE THE PASSWORD
To disable the password, select this function (do not enter any key when you are prompt to enter a
password), and press the <Enter> key and a message will appear at the center of the screen: