WEN 4205 8 inch Drill Press with Laser - Manual (Page 15)

15
Assembly and adjustments (continued)
Tilt the table
(Fig. 11)
The table can be tilted from 0 to 45° to the left and right.
1. Loosen the bevel lock bolt (1) with a wrench.
2. Tilt the table (2) to the desired angle, using the bevel scale (3) as a basic guide.
3. Re-tighten the bevel lock bolt (1).
4. To return the table to its original position, loosen the bevel lock bolt. Realign the bevel scale (2)
to the 0° setting.
5. Tighten the bevel lock bolt (1) with the wrench.