WEN 100T1 100W Soldering Gun - Manual (Page 2)

11. Don’t over reach, keep proper footing and balance
at all times.
12. Maintain tools with care, for safety and perfor-
mance, keep tools clean and sharp. Follow regular
maintenance procedures. Inspect tool cords and
extension cords periodically. If damaged, use a
certified service technician to repair. Keep handle
dry, clean, and free from grease or oil.
13. Disconnect tools, when not in use, servicing, or
performing maintenance.
14. Remove adjusting keys and wrenches, before
turning on the tool, make sure no adjustment keys
or tools are connected to the tool.
15. Avoid unintentional starting, never carry a plugged
in tool with your finger on the switch. Turn switch
off before plugging it in.
16. When working outdoors, use outdoor rated
extension cords.
17. Stay alert, use common sense. Pay attention to
your work. Do not operate tool when overtired.
18. Check for damaged parts before using, to insure
safe operation. Check alignment of moving parts,
for broken parts, binding of moving parts, proper
mounting, and any conditions that might affect
safe operation. Any guard or part that is damaged
should be replaced or repaired by a authorized ser-
vice technician. Do not use the tool if switch does
not turn on or off properly. Have defective switches
replaced by an authorized service technician.
19. WARNiNG
Use of any accessory or attachment other than
those recommended in this manual may present
the risk of personal injury.
20. Authorized service technician repairs only. This
electric power tool is must only be repaired by an
authorized service center. Do not repair yourself or
you may cause damage to the tool and put yourself
in danger.
SAvE thESE iNStRUctioNS.
NO. STOCK NO. DESCRIPTION
1 100t1-001 Soldering Tip
2 100T1-002 Movable elastic
3 100T1-003 Heat insulation plate
4 100T1-004 Transformer
5 100T1-005 Cabinet(a)
6 100T1-006 Cabinet(b)
7 100T1-007 Nameplate
8 100T1-008 Screw
9 100T1-009 Cord
10 100T1-010 Cord armor
11 100T1-011 Terminal board
12 100T1-012 Switch
13 100T1-013 Push button
14 100T1-014 Bulb Socket
15 100T1-015 Bulb
It's not how, it's WEN the
project get's done!
WenProducts.com
800- 232-1195
M–F 8-5 CST
[email protected]
Product Questions or Technical Support?
Please Feel Free to Contact Us!
WARRANTY
WEN Products is committed to build tools that are
dependable for years. Our warranties are consistent with
this commitment and our dedication to quality
LIMITED WARRANTY OF WEN CONSUMER POWER
TOOLS PRODUCTS FOR HOME USE GREAT LAKES
TECHNOLOGIES, LLC ("Seller") warrants to the original
purchaser only, that all WEN
consumer power tools will be free from defects in material
or workmanship for a period of one year from date of
purchase. Ninety days for all WEN products, if the tool is
used for professional use.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE
REMEDY under this Limited Warranty and, to the extent
permitted by law, any warranty or condition implied by
law, shall be the repair or replacement of parts, without
charge, which are defective in material or workmanship
and which have not been misused, carelessly handled,
or misrepaired by persons other than Seller or Authorized
Service Center. To make a claim under this Limited War-
ranty, you must return the complete power tool product;
transportation prepaid, to Great Lakes Technologies,
LLC – 501 Davis Road – Elgin, IL. 60123 with a copy of
the original receipt which is legible and clearly defines
Date of Purchase including month and year and Place of
Purchase.
THIS LIMITED WARRANTY DOES NOT APPLY TO AC-
CESSORY ITEMS SUCH AS CIRCULAR SAW BLADES,
DRILL BITS, ROUTER BITS, JIGSAW BLADES,
SANDING BELTS, GRINDING WHEELS AND OTHER
RELATED ITEMS. ANY IMPLIED WARRANTIES SHALL BE LIMITED
IN DURATION TO ONE YEAR FROM DATE OF
PURCHASE. SOME STATES IN THE U.S., SOME
CANADIAN PROVINCES DO NOT ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS) ARISING FROM THE SALE
OR USE OF THIS PRODUCT. SOME STATES IN
THE U.S. AND SOME CANADIAN PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE IN
THE U.S., PROVINCE TO PROVINCE IN CANADA
AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO POR-
TABLE ELECTRIC TOOLS, BENCH POWER TOOLS,
OUTDOOR POWER EQUIPMENT AND PNEUMATIC
TOOLS SOLD WITHIN THE UNITED STATES OF
AMERICA, CANADA AND THE COMMONWEALTH
OF PUERTO RICO. FOR WARRANTY COVERAGE
WITHIN OTHER COUNTRIES, CONTACT THE WEN
CUSTOMER SUPPORT.