Work Sharp WSKTS-W Original KNIFE & TOOL SHARPENER - Manual (Page 21)

User’s Guide 21
NOTE: Some tools require the blade to
be inserted through the grinding frame
opening (as shown) to allow belt access to
the cutting edge.
Repeat 2 to 4 strokes or until you are satisfied with the sharpness.
Sharpening Tools
Pruners, Shears, & Other Bypass Cutting Tools
12
NOTE: These tools usually have only one sharp, beveled blade.
Re-sharpen ONLY the beveled blade. These tools do not require
sharpening to a precise angle; just let the belt conform to the edge of
the tool.
Step 1
Remove guide, install red belt ; move
sharpening cassette to grinding position B.
Belt: P220 RED
Step 2
Clamp pruners in
a bench vise.