ADT Security Services K5309V2 - Manual (Page 20)

– 20 –
%\SDVVLQJ3URWHFWLRQ=RQHV
4XLFN%\SDVV
If programmed, "Quick Bypass" allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
1. + 6 + [#]
(Security Code) BYPASS
In a few moments, all open zones will be displayed
and automatically bypassed.
Make sure that only those
zones that you wish to leave unprotected are bypassed, and
that there are no other zones unintentionally left open.
(-7%61)(  46)77
 83 7,3; *%9087
English Display: NOT READY
2. Wait for all bypassed zones to be displayed, then arm
the system as desired.
Ask your installer if "Quick Bypass" is active for your
system, and if so, check here:
(-7%61)( &=4%77
6)%(= 83 %61
English Display: BYPASS
&KLPH0RGH
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed. When Chime mode is activated:
•
Three tones sound at the touchpad whenever a perimeter door or window is opened.
•
Interior zones do not produce a tone when they are faulted.
•
Pressing the READY key will display the open protection points.
To turn Chime Mode on/off (system must be disarmed) :
+ 9
(Security Code) CHIME
The CHIME message appears when on. Perimeter
zones will cause a tone when faulted.
The CHIME message disappears when Chime mode
is off.
(-7%61)(
6)%(= 83 %61
English Display: READY
(-7%61)( ',-1)
6)%(= 83 %61
English Display: CHIME
Voice Chime: You can set the Voice Touchpads (if installed) to announce faulted
(opened) entry/exit or perimeter zones whenever normal Chime mode is on.
To turn Voice Chime Mode on or off: # + 0 + 2 + 4
(normal Chime mode must be on first)
When Voice Chime is on, any faulted zone(s) causes a voice status announcement,
chime and display. When off, the sounder still provides chime if normal Chime
mode is on.