ADT Security Services K5309V2 - Manual (Page 27)

– 27 –
3DJLQJ)HDWXUH
$ERXW0DQXDO3DJLQJ
Your system may be set up so you can manually send a message to up to four pagers.
•
Your installer programs the paging function key and the pager phone numbers.
•
Pressing the paging keys sends the message 9 9 9 – 9 9 9 9 to the selected pager .
•
This message could mean “call home”, “call your office”, or any other prearranged
meaning.
•
See the Paging chart at the back of this manual for details of the paging setup for
your system.
1. Hold pager key 2 seconds then press [1-4].
(pager no.)
Press and hold the programmed Paging Key for at
least 2 seconds (wait for beep), then press the pager
number (1-4)* representing the pager intended to
receive the message.
2. The recipient, on seeing the 999–9999 message, will
understand the prearranged meaning of this signal.
* If no number is pressed, the message is sent to pager 1 .
(-7%61)(
6)%(= 83 %61
English Display: READY

Pager Display
/DWFK.H\3DJLQJ
You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event “03”). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
If programmed, the message that is sent is: 7 7 7 – 7 7 7 7 .