Catskill Craftsmen 2005 - Manual (Page 10)

STEP 8
DRAWER ASSEMBLY
Attach Drawer Back to Drawer Sides using 1-1/4” Phillips Flat Head #8
screws. Then insert Drawer Bottom into slots (Best side up). Put bastion posts into
Drawer Front & secure to Drawer Sides using barrel nuts & set screws. Attach the
Glide inserts to the drawer sides so that the front of the glide insert touches the
drawer front, using 7/16” Phillips Pan Head #6 Screws.
Illustration 8
STEP 9
FINAL STEP
After you have the drawer assembled simply upright the unit and attach the
drawer to the cart by sliding it into the Glide Rails. Drawer glides will lock into place.