Catskill Craftsmen 2005 - Manual (Page 9)

STEP 7
7.
7A 7B.
7C.
7A
7B
7C
Standoff must be placed on
post prior to the Pipe Holder.
End Cap
See illustration 7A and 7B. Screw Brass Towel Bar Posts into the Top Side
Braces and the Drawer Front using 1 1/4” #8 Screws. Slide Standoffs over Posts. Attach
Pipe Holders by sliding Supports over Posts and secure with tiny Set Screws using Allen
Wrench provided. Set Screws should face down. Slide Towel Bar through holes in
Supports and secure in place with Set Screws. Bar should be equidistant on either side of
the Supports. Tap End Caps into place. See ilustration 7C.