Catskill Craftsmen 2005 - Manual (Page 7)

STEP 3
ATTACH TOP BACK BRACE
You may find it easiest to attach the Top Back Brace and shelves by inverting the island.The Top Back
Brace is located 1 1/4” down on the legs. This allows clearance for hinges and the drop leaf supports. Attach the
Top Back Brace to the left and right side panels with bastions.
STEP 4
TABLE TOP PREPARATION
Invert Table Top on smooth flat surface. Attach the 2 Table Top Sticks to the bottom of the table top
with 1 1/4” #8 screws, 2 per stick countersunk holes on top of the stick are up so that screw head is flush with top of
stick when tightened down. Attach the 3 hinges with 5/8” #8 screws large part of hinges go on Drop Leaf. Attach Drop
Leaf Supports with 5/8” #8 screws.
Illustration 3
Illustration 4
The 3 counter sunk holes
on the Table Top Sticks
Face in.